300 6mm diameter brushless DC motors
Small brushless DC servo motors for prosthetics, rehab and haptics.
Made to order for an Australian customer this particular motor showcases the technical diversity and ability to customise the DC motors for medical rehabilitation applications
Pictured here is a recent shipment for an Australian customer of 6mm diameter brushless DC servo motors that are destined for use in a medical rehabilitation application. This motor gearhead and feedback combination features a high motor speed capability of up to 100,000rpm on very low 3V, 6V and 12V winding options. There is also the possibility to customise maxon’s coreless winding to suit the desired speed range. The 6mm diameter planetary gearhead can reduce the speed and increase the torque of the motor by up to 854 times. The motor is fitted with a hall sensor network for feedback that gives a state change every 60 degrees. Considering both the speed of the motor and the increased resolution from the gearbox reduction this equates to a high resolution control over the motor. Fitted with multiple stainless steel ball bearings the motor and gearhead offer high radial and axial load levels and the motor preloading controls excessive resonance at such high speeds. In each application the winding constants and the gearhead ratios must be carefully considered to best suit the application. For more information please contact + 61 2 9457 7477.
© 2015 by maxon motor Australia
Back to the news overview